WEKO3
アイテム
MODIFICATION OF POLYURETHANE ELASTOMER BY USING A REACTIVE SILICONE
https://kougei.repo.nii.ac.jp/records/193
https://kougei.repo.nii.ac.jp/records/1930030ba14-19b4-486d-8ad7-c051e7181b07
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
KJ00001511968.pdf (517.1 kB)
|
|
| Item type | [ELS]紀要論文 / Departmental Bulletin Paper(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2017-04-21 | |||||
| タイトル | ||||||
| タイトル | MODIFICATION OF POLYURETHANE ELASTOMER BY USING A REACTIVE SILICONE | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | eng | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | departmental bulletin paper | |||||
| 雑誌書誌ID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AN00159741 | |||||
| 論文名よみ | ||||||
| タイトル | MODIFICATION OF POLYURETHANE ELASTOMER BY USING A REACTIVE SILICONE | |||||
| 著者 |
YAMADA, Masanori
× YAMADA, Masanori× 松本, 利彦× 黒崎, 壽一× IWASAKI, Yoshio× SEJIMO, Akinobu× OKADA, Hisao× YAMADA, Masanori× MATSUMOTO, Toshihiko× KUROSAKI, Toshikazu× IWASAKI, Yoshio× SEJIMO, Akinobu× OKADA, Hisao |
|||||
| 著者所属(英) | ||||||
| en | ||||||
| Department of Industrial Chemistry, Faculty of Engineering, Tokyo Institute of Polytechnics | ||||||
| 著者所属(英) | ||||||
| en | ||||||
| Department of Industrial Chemistry, Faculty of Engineering, Tokyo Institute of Polytechnics | ||||||
| 著者所属(英) | ||||||
| en | ||||||
| Department of Industrial Chemistry, Faculty of Engineering, Tokyo Institute of Polytechnics | ||||||
| 著者所属(英) | ||||||
| en | ||||||
| Meiji Rubber & Chemical Co., Ltd. | ||||||
| 著者所属(英) | ||||||
| en | ||||||
| Meiji Rubber & Chemical Co., Ltd. | ||||||
| 著者所属(英) | ||||||
| en | ||||||
| Meiji Rubber & Chemical Co., Ltd. | ||||||
| 記事種別(日) | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | 論文 | |||||
| 記事種別(英) | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | Article | |||||
| 抄録(英) | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | Surface characteristic of polyurethane elastomer (PUE) was ameliorated by reacting the prepolymer with the reactive silicone (Si-NCO), one side of which was terminated with isocyanate group, in the presence of 3.3'-dichloro-4,4'-diaminodiphenylmethane (MOCA). Tackiness and surface energy of the modified FUE decreased with an increase in Si-NCO content. Abrasion resistance was enhanced by adding Si-NCO in a noticeable manner. How-ever, the addition of more than a certain amount of Si-NCO diminished the resistance partly due to a deterioration of mechanical properties. The optimum modification of PUE surface was achieved by adding around 3phr (parts per hundred parts of rubber) of Si-NCO, where the tackiness was able to decrease without significantly sacrificing the mechanical strength. | |||||
| 書誌情報 |
東京工芸大学工学部紀要 en : The Academic Reports, the Faculty of Engineering, Tokyo Polytechnic University 巻 14, 号 1, p. 27-35, 発行日 1991 |
|||||
| 表示順 | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | 6 | |||||
| アクセション番号 | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | KJ00001511968 | |||||
| ISSN | ||||||
| 収録物識別子タイプ | ISSN | |||||
| 収録物識別子 | 03876055 | |||||
