WEKO3
アイテム
TaC-NiおよびTaC-Ni-Mo系サーメットの焼結と微細構造の観察
https://kougei.repo.nii.ac.jp/records/159
https://kougei.repo.nii.ac.jp/records/159e227f0fc-5277-4253-b215-df6036f84e6e
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
|
Item type | [ELS]紀要論文 / Departmental Bulletin Paper(1) | |||||
---|---|---|---|---|---|---|
公開日 | 2017-04-21 | |||||
タイトル | ||||||
タイトル | TaC-NiおよびTaC-Ni-Mo系サーメットの焼結と微細構造の観察 | |||||
タイトル | ||||||
タイトル | Sintering of TaC-Ni and TaC-Ni-Mo Cermets and Observetion on their Microstructures | |||||
言語 | en | |||||
言語 | ||||||
言語 | jpn | |||||
資源タイプ | ||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
資源タイプ | departmental bulletin paper | |||||
雑誌書誌ID | ||||||
収録物識別子タイプ | NCID | |||||
収録物識別子 | AN00159741 | |||||
論文名よみ | ||||||
タイトル | TaC-Ni オヨビ TaC-Ni-Moケイサーメット ノ ショウケツ ト ビサイコウゾウ ノ カンサツ | |||||
著者 |
飯泉, 清賢
× 飯泉, 清賢× 栗田, 諭× 久高, 克也× IIZUMI, Kiyotaka× KURITA, Satoshi× KUDAKA, Katsuya |
|||||
著者所属(日) | ||||||
東京工芸大学工学部工業化学科 | ||||||
著者所属(日) | ||||||
東京工芸大学工学部工業化学科 | ||||||
著者所属(日) | ||||||
東京工芸大学工学部工業化学科 | ||||||
記事種別(日) | ||||||
内容記述タイプ | Other | |||||
内容記述 | 論文 | |||||
記事種別(英) | ||||||
内容記述タイプ | Other | |||||
内容記述 | Article | |||||
抄録(英) | ||||||
内容記述タイプ | Other | |||||
内容記述 | TaC-Ni and TaC-Ni-Mo cermets were sintered at 1150~1400℃ in a vacuum of 5×10^<-5> Torr for 1hr. The effect of addition of molybdenum on the sinterability and the microstructure of TaC-base cermets were studied by measurments of relative density and micro・Vicker's hardness and Auger electron microscopy. Relative densities and hardness of the TaC-Ni-Mo cermets were higher than these of the TaC-Ni cermets. In TaC-Ni-Mo cermets, liquid phase appeared relatively lower temperature (1150~1250℃) than in TaC-Ni cermet (about 1290℃) and it is estimated that the wettability between solid and liquid phases is so improved that the grain growth of TaC is suppressed. It was obsreved that all molybdenum resolves to nickel phase and TaC silghtly resolves to nickel or Ni-Mo phase. | |||||
書誌情報 |
東京工芸大学工学部紀要 en : The Academic Reports, the Faculty of Engineering, Tokyo Polytechnic University 巻 12, 号 1, p. 65-69, 発行日 1989 |
|||||
表示順 | ||||||
内容記述タイプ | Other | |||||
内容記述 | 10 | |||||
アクセション番号 | ||||||
内容記述タイプ | Other | |||||
内容記述 | KJ00001511959 | |||||
ISSN | ||||||
収録物識別子タイプ | ISSN | |||||
収録物識別子 | 03876055 |