WEKO3
アイテム
TiO焼結体の物理的諸性質におよぼすMgO添加の影響
https://kougei.repo.nii.ac.jp/records/100
https://kougei.repo.nii.ac.jp/records/100acf084fb-3e80-48c5-bb1b-27560fe3aa0f
名前 / ファイル | ライセンス | アクション |
---|---|---|
![]() |
|
Item type | [ELS]紀要論文 / Departmental Bulletin Paper(1) | |||||
---|---|---|---|---|---|---|
公開日 | 2017-04-21 | |||||
タイトル | ||||||
タイトル | TiO焼結体の物理的諸性質におよぼすMgO添加の影響 | |||||
タイトル | ||||||
タイトル | Effect of Doping of MgO on the physical Properties of Sintered TiO | |||||
言語 | en | |||||
言語 | ||||||
言語 | jpn | |||||
資源タイプ | ||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
資源タイプ | departmental bulletin paper | |||||
雑誌書誌ID | ||||||
収録物識別子タイプ | NCID | |||||
収録物識別子 | AN00159741 | |||||
論文名よみ | ||||||
タイトル | TiOショウケツタイ ノ ブツリテキ ショセイシツ ニ オヨボス MgOテンカ ノ エイキョウ | |||||
著者 |
飯泉, 清賢
× 飯泉, 清賢× 高橋, 直行× 吉野, 広幸× 久高, 克也× IIZUMI, Kiyokata× TAKAHASHI, Naoyuki× YOSHINO, Hiroyuki× KUDAKA, Katsuya |
|||||
著者所属(日) | ||||||
東京工芸大学工学部工業化学科 | ||||||
著者所属(日) | ||||||
東京工芸大学工学部 | ||||||
著者所属(日) | ||||||
東京工芸大学工学部 | ||||||
著者所属(日) | ||||||
東京工芸大学工学部工業化学科 | ||||||
記事種別(日) | ||||||
内容記述タイプ | Other | |||||
内容記述 | 論文 | |||||
記事種別(英) | ||||||
内容記述タイプ | Other | |||||
内容記述 | Article | |||||
抄録(日) | ||||||
内容記述タイプ | Other | |||||
内容記述 | MgOを0, 1, 5, 10, 15および20 mo1%添加したTiO焼結体の物理的性質を測定し次の結果を得た.生成相はすべてNaCl型構造のTiOで,MgOはTiO相に約15%まで固溶した.MgO添加によりTiO焼結体の粒成長は抑制され,添加量の増加とともに平均粒径は減少した.MgO添加量の増加に従って焼結性は低下し,相対密度は減少した.一般に焼結体の硬さの増加に対するMgO添加の効果は大きくなく, 15%添加により無添加の最大値よりわずかに大きいビッカース硬度1350が得られた.焼結体の電気抵抗はMgO量の増加とともに増加した.これはMgOの添加による粒成長の抑制と気孔率の増加を原因とする. | |||||
抄録(英) | ||||||
内容記述タイプ | Other | |||||
内容記述 | Some physical properties of sintered TiO doped with 0, 1, 5, 10, 15 and 20 mol% MgO were measured. All of the Ti phases obtained were identified to be NaCl type structure and solid solubility of MgO in TiO phase was assumed to be about 15%. The grain growth of TiO was suppressed by the doping of Mg0 and as the addition of MgO increased, the grain size decreased. Moreover, as the addition of MgO increased, the sinterability of TiO decreased and the relative density decreased. The effect of the addition of MgO on the hardness of TiO ceramics was not so significant. 0nly when 15 mo1% MgO was doped, the microvicker's hardness was about 1350, slightly larger than that of the maximum value of TiO ceramics without any additives. The electrical resistivity of TiO ceramics increased with an increase of the addition of MgO. This is assumed to be by reasons of the suppression of grain growth and the increase of the porosity of TiO ceramics. | |||||
書誌情報 |
東京工芸大学工学部紀要 en : The Academic Reports, the Faculty of Engineering, Tokyo Polytechnic University 巻 8, 号 1, p. 30-34, 発行日 1985 |
|||||
表示順 | ||||||
内容記述タイプ | Other | |||||
内容記述 | 8 | |||||
アクセション番号 | ||||||
内容記述タイプ | Other | |||||
内容記述 | KJ00001511901 | |||||
ISSN | ||||||
収録物識別子タイプ | ISSN | |||||
収録物識別子 | 03876055 |